Configuring Redundancy Group Membership - Brocade Communications Systems RFS6000 System Reference Manual

5
Configuring controller redundancy and clustering
4. The Apply and Revert buttons are unavailable for use with the Status screen, as there are no

Configuring redundancy group membership

The redundancy group should be disabled to conduct an Add/Delete operation. There are a
minimum of 2 members needed to comprise a Redundancy Group, including the initiating
controller
To configure controller redundancy memberships:
1. Select Services > Redundancy from the main menu tree.
2. Select the Member tab.
300
Connectivity Status
Displays the current connectivity status of the cluster membership.
AP Licenses in
Displays the total number of Access Point device adoption licenses available to
this controller.
controller
AAP Licenses in Displays the total number of Adaptive Access Point device adoption licenses
available to this controller.
controller
Access Points on this Displays the total of the number of Access Points adopted by this controller.
controller
Adaptive Access Points Displays the total of the number of Adaptive Access Points adopted by this
controller.
on this controller
Adoption capacity on Displays the AP adoption capability for this controller. Compare this value with the
this controller adoption capacity for the entire cluster to determine if the cluster members (or this
controller) have adequate adoption capabilities. For information on licensing rules
impacting redundancy group members, see
aggregation rules"
Rogue Access Points on Displays the number of rogue APs detected by this controller. Compare this value
this controller with the cumulative number of rogues detected by the group to discern whether an
abundance of rogues has been located by a particular controller and thus
escalates a security issue.
Radios on this Displays the number of radios used with this controller.
controller
Self-healing radios on
Displays the number of radios on this controller with self-healing enabled.
Compare this value with the total number of radios within the group to determine
this controller
how effectively radios can self-heal if problems exist.
Wireless Clients on this
Displays the number of Clients currently associated with the radio(s) used with this
controller. Compare this number with the number of Clients within the group to
controller
determine how effectively Clients are distributed within the cluster.
editable parameters to save or revert.
The Redundancy screen displays with the Configuration tab selected.
"Redundancy group license
on page 305.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01