Viewing Switch Configurations - Brocade Communications Systems RFS6000 System Reference Manual

3. Enter the following parameters to configure a WAN Interface Card:.
Access Port Name If your Wireless WAN service provider requires you to specify an Access Port Name, enter that
User Name
Password
Activation Mode
Preferred DNS
Server
Alternate DNS
Server
NOTE
To use a 3G Wireless WAN card with the switch, it must first be initialized on a laptop. For activation
and initialization information, refer to the instructions included with the WAN card. If your Wireless
WAN Interface card service provider makes use of a PIN number for access to the network, disable
the PIN number before using the card with the switch.
4. To reset the WAN Interface card configuration, click the Reset button and the configuration

Viewing Switch Configurations

Use the Configurations screen to review the configuration files available to the switch. The details
of each configuration can be viewed individually. Optionally, edit the file to modify its name or use
the file as the switch startup configuration. A file can be deleted from the list of available
configurations or transferred to a user specified location.
NOTE
To view the entire switch configuration using SNMP, the switch CLI provides a better medium to
review the entire switch configuration.
NOTE
The Brocade RF Management Software is a recommended utility to plan the deployment of the
switch and view its configuration once operational in the field. Brocade RFMS can help optimize the
positioning and configuration of a switch (and its associated radios) in respect to a WLAN's client
throughput requirements and can help detect rogue devices. For more information, refer to the
Brocade Website.
To view the Configuration files available to the switch:
1. Select Switch > Configurations from the main menu tree.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
value here. The range is <0-25> and default value is 0
User Name
Enter the
range is <0-32> and default value is 0
Password
Enter the
Card.The string range is <0-30> and default value is 0
Enable
Select
Disable from the pull-down menu to turn off the Wireless WAN Interface Card.
Displays the primary/preferred DNS Server provided by the Wireless WAN service provider.
Displays the secondary/alternate DNS Server provided by the Wireless WAN service provider.
fields will be cleared.
configured for use with the Wireless WAN Interface Card. The string
associated with the above User Name for the Wireless WAN Interface
from the pull-down menu to enable the Wireless WAN Interface Card. Select
3
63