Reviewing Found Beacons - Brocade Communications Systems RFS6000 System Reference Manual

Reviewing Found Beacons

Select the Beacons Found tab to view the enhanced beacons report created by the switch. The
table displays beacon information collected during the AP's channel scan. The table contains at
least 5 entries for each AP radio (channel) scan. The information displayed within the Beacons
Found tab is read-only with no user configurable parameters.
To view the enhanced beacons report:
1. Select Security > Enhanced Probe/Beacon Table from the main menu tree.
2. Select the Beacons Found tab.
3. Refer to the following information as displayed within the Beacons Found tab.
Portal MAC
Rogue AP MAC
Signal Strength (dBm) Displays the signal strength when the unadopted AP was detected.
Heard Channel
Heard Time
4. Select the Clear Report button to clear the statistic counters and begin a new data calculation.
Reviewing Found Probes
Refer to the Probes Found tab to view the enhanced Probe report created by the switch. The table
displays probe information collected during the AP's channel scan. The information displayed
within the Probes Found tab is read-only with no user configurable parameters.
To view the enhanced beacons table report:
1. Select Security > Enhanced Probe/Beacon Table from the main menu tree.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Displays the MAC address of the unadopted AP detected by the enhanced beacon
supported AP.
Displays the MAC address of the enhanced beacon supported AP.
Displays the channel frequency when the unadopted AP was detected.
Displays the time when the unadopted AP was detected.
6
449