Configuring Radius Users - Brocade Communications Systems RFS6000 System Reference Manual

6
5. Enable the
Domain Name Enter the Active Directory domain name.
Domain Admin User Enter the Administrator Username of the LDAP server
Domain Admin Enter the Administrator User password
Password
LDAP Agent Retry Defines the time interval after which the LDAP Agent will try to reconnect with the LDAP server if the previous
Timeout join attempt had failed.
LDAP Server Dead This is a period in seconds for which the RADIUS server does not attempt any connection with the LDAP
Period server after the LDAP server was found to be unavailable.
NOTE
Administrator Username and Administrator User password are required for the switch (which runs
radius server) to become part of the Windows domain of which the Active Directory Server is part of.
NOTE
The same configuration is supported for the Secondary LDAP agent of the Secondary LDAP server
also.
6. Click the Apply button to save the changes made to within the screen.
7.

Configuring Radius Users

Refer to the Users tab to view the current set of users and groups assigned for the Radius server.
The Users tab is employed when Local is selected as the Auth Data Source within the
Authentication & Accounting tab.
To define the Radius user permissions for switch access:
1. Select Security > Radius Server from the main menu.
426
Enable Primary Ldap Agent
authentication system with user/password database as Active Directory.
Click the Revert button to cancel any changes made within the screen and revert back to the
last saved configuration.
checkbox to support the PEAP-MSCHAPv2
e.g. MotorolaAD.com
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01