Configuring Ipsec Vpn Authentication - Brocade Communications Systems RFS6000 System Reference Manual

6
7.
8. Click Cancel to disregard the changes and revert to the last saved configuration.

Configuring IPSEC VPN Authentication

If IKE is not used for establishing security associations, there is no negotiation of security
associations. Consequently, the configuration information in both systems must be the same for
traffic to be processed successfully by the IPSec resource. Select the Authentication tab to define
the credential verification mechanisms used with the IPSEC VPN configuration.
To define the IPSEc VPN authentication configuration:
1. Select Security > IPSec VPN from the main menu tree.
2. Select the Authentication tab.
3. Define whether IPSec VPN user authentication is conducted using a Radius Server (by
4. Enter a NAS ID for the NAS port.
406
To add a new range of IP addresses, click the Add button (within the IP Range tab) and define
the range in the fields provided. Click OK when completed to save the changes.
selecting the Radius radio button), by a user-defined set of names and password (by selecting
the User Table radio button) or if no authentication is used for credential verification (by
selecting the No Authentication radio button).
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01