Defining The Ipsec Vpn Remote Configuration - Brocade Communications Systems RFS6000 System Reference Manual
Provides centralized wireless lan (wlan)
Hide thumbs
Also See for RFS6000:
- Cli reference manual (839 pages) ,
- System reference manual (574 pages)
Table of Contents
Advertisement
6
2. Click the Configuration tab.
3. Click the Add button.
4. Define the following information as required for the new transform set.
Name
Create a name describing this new transform set.
AH Authentication
Select the
•
Scheme
None - No AH authentication is used.
•
AH-MD5-HMAC - AH with the MD5 (HMAC variant) authentication algorithm.
•
AH-SHA-HMAC - AH with the SHA (HMAC variant) authentication algorithm.
ESP Encryption
Select the
•
Scheme
None - No ESP encryption is used with the transform set.
•
ESP-DES - ESP with the 56-bit DES encryption algorithm.
•
ESP-3DES - ESP with 3DES, ESP with AES.
•
ESP-AES - ESP with 3DES, ESP with AES (128 bit key).
•
ESP-AES 192 - ESP with 3DES, ESP with AES (192 bit key).
•
ESP-AES 256 - ESP with 3DES, ESP with AES (256 bit key).
ESP Authentication
Select the
•
Scheme
None - No ESP authentication is used with the transform set.
•
MD5-HMAC - AH with the MD5 (HMAC variant) authentication algorithm.
•
SHA-HMAC - AH with the SHA (HMAC variant) authentication algorithm.
Mode
Define the current mode used with the transform set. The mode is either Tunnel or Transport.
5. Refer to the Status field for the current state of the requests made from applet. This field
6. Click OK to use the changes to the running configuration and close the dialog.
7.
Defining the IPSec VPN Remote Configuration
Use the IPSec VPN Remote tab to configure the DNS and/or WINS Servers used to route packets to
the remote end of the IPSec VPN tunnel. The Remote tab is also used for defining the IP address
range used within the IPSec VPN tunnel and configuring the authentication scheme for user
permissions within the IPSec VPN tunnel.
404
Use AH
checkbox to define the AH Transform Authentication scheme. Options include:
Use ESP
checkbox to define the ESP Encryption Scheme. Options include:
Use ESP
checkbox to define the ESP Authentication Scheme. Options include:
displays error messages if something goes wrong in the transaction between the applet and
the switch.
Click Cancel to close the dialog without committing updates to the running configuration.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Advertisement
Table of Contents
Troubleshooting
