Configuring Firewall Logging Options - Brocade Communications Systems RFS6000 System Reference Manual
Provides centralized wireless lan (wlan)
Hide thumbs
Also See for RFS6000:
- Cli reference manual (839 pages) ,
- System reference manual (574 pages)
Table of Contents
Advertisement
Group Name
Select a Group Name filter, if any, to apply to the role.
Available Group Name filters are:
•
Exact
•
Contains
•
Not Contains
in the role
•
Any
client MAC Address
Configure the client MAC Address filters, if any, applied to each role. The client MAC Address filter can be set to apply
the role to any client MAC Address or a specific client MAC Address or a client MAC Mask.
Authentication
Select an Authentication filter, if any, to apply to the role.
Available Authentication filters are:
•
Equals
specified in the role
•
Not Equals
Authentication method specified in the role
•
Any
Encryption
Select an Encryption filter, if any, to apply to the role.
Available Encryption filters are:
•
Equals
in the role
•
Not Equals
method specified in the role
•
Any
6. Refer to the Status field for the state of the requests made from applet. This field displays error
7.
8. Click Cancel to close the dialog without committing updates to the running configuration.
Configuring Firewall Logging Options
To view firewall logging rules:
1. Select Security > Wireless Firewall from the main tree menu.
2. Click the Configuration tab.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
: The role will only be applied when the exact Radius Group Name string specified in the role
: The role will be applied when the Radius Group Name contains the string specified in the role
: The role will be applied to when the Radius Group Name does not contain the string specified
: The role will be applied to any Radius Group Name
: The role will only be applied when the Authentication type matches the exact Authentication method
: The role will only be applied when the Authentication type does not match the exact
: The role will be applied to any Authentication type
: The role will only be applied when the Encryption type matches the exact Encryption method specified
: The role will only be applied when the Encryption type does not match the exact Encryption
: The role will be applied to any Encryption type
messages if something goes wrong in the transaction between the applet and the switch.
Click OK to use the changes to the running configuration and close the dialog.
6
377
Advertisement
Table of Contents
Troubleshooting
