Configuring The Firewall - Brocade Communications Systems RFS6000 System Reference Manual

6
5. Click the Memberships button.
6. Select the box to the right of each WLAN you want associated with the ACL.
7.
8. Click OK to use the changes to the running configuration and close the dialog.
9. Click Cancel to close the dialog without committing updates to the running configuration.

Configuring the Firewall

Configure the Firewall to create either standard/extended ip or extended MAC access control lists.
To configure the Firewall:
1. Select Security > Wireless Firewall from the main tree menu.
2. Click the Configuration tab.
3. Click the ACL tab.
4. Add a new ACL entry as explained in Appendix , Adding a New ACL.
5. The Configuration tab consists of the following two fields:
362
Selecting a WLAN maps it the MAC address range and allow or deny designation assigned to it.
Consequently, be sure you are not restricting client traffic for a WLAN that requires those MAC
addresses to interact with the switch.
Refer to the Status field for the state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
•
ACLs - existing access lists
•
Associated Rules - allow/deny rules
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01