Viewing Ap Statistics - Brocade Communications Systems RFS6000 System Reference Manual

4
3. Click the Add button to display a screen containing settings for adding a radio
4. Enter the device MAC Address (the physical MAC address of the radio). Ensure that this
5. Use the AP Type drop-down menu to define the radio type you would like to add. If adding
6. From the Radio Settings section, select the radio type checkboxes corresponding to the type of
7.
8. Refer to the Status field for the current state of the requests made from applet. This field
9. If clustering is configured and the Cluster GUI feature is enabled, the Apply to Cluster feature
10. Click OK to use the changes to the running configuration and close the dialog.
11. Click Cancel to close the dialog without committing updates to the running configuration.

Viewing AP Statistics

Refer to the Statistics tab for information and high-level performance data for individual radios.
Performance information can be reviewed for either a 30 second or one hour interval. Use the
Details button to display additional information for an individual radio.
184
address is the actual hard-coded MAC address of the device.
Brocade Mobility 7131 Series Access Point model Access Point, the Access Port conversion will
render the Access Point a "thin" Access Port.
AP radio used.Available radio types are dependant on the AP Type selected above.
Enter a numerical value in the Radio Index field for each selected radio.
The Radio Index is a numerical value assigned to the radio as a unique identifier. For example:
1, 2, or 3. The index is helpful for differentiating radios of similar type and configuration.
displays error messages if something goes wrong in the transaction between the applet and
the switch.
will be available. Click the Apply to Cluster button to apply the AP radio settings to all members
in the cluster.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01