Table of Contents
Advertisement
3
Hardware installation
LED functionality for the PCIe cards is listed in the following table:
LED functionality for the Hardware Cryptography Engine is listed in the following table:
LED
DC Indicator
Power supply status LED
Each power supply module has a single bi-color LED to indicate power supply status. The LED is
visible on the rear panel of each installed power supply.
The LED functionality for the power supply is listed in the following table:
Color
-
Amber
Amber
Green
Green
12
Color
State
Green/Red
Green On/Red Off
Green Off/Red On
State
Description
Off
No AC power to all power supplies
Solid
No power to this power supply only (for 1+1 configuration) or a
power supply critical event has caused a shutdown (power
supply failure, blown fuse (1+1 only), over voltage condition,
under voltage condition, fan failed)
1Hz Blink
Power supply warning events where the power supply
continues to operate (high temperature, high power, high
current, slow fan speed)
1Hz Blink
AC present, only 5 VSB on (PS off)
Solid
Output on and normal operation
Description
Normal function
Power fault
Brocade Mobility RFS9510 Controller Installation Guide
53-1002918-01
Advertisement
Table of Contents
