Configuring Ip Forwarding - Brocade Communications Systems RFS6000 System Reference Manual

3. Enter a Domain Name in the text field. This is the domain of the switch.
4. Refer to the Status field for the current state of the requests made from applet. This field
5. Click OK to use the changes to the running configuration and close the dialog.
6. Click Cancel to close the dialog without committing updates to the running configuration.

Configuring IP Forwarding

The IP Forwarding table lists all the routing entries to route the packets to a specific destination. To
view the IP forwarding configuration:
1. Select Network > Internet Protocol from the main tree menu.
2. Select the IP Forwarding tab.
3. The read-only IP Forwarding tab displays the current status between VLANs. To toggle the
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
displays error messages if something goes wrong in the transaction between the applet and
the switch.
Use the Filtering Option to view the details displayed in the table.
status of routing between VLANs, use the Enable/Disable options located at the bottom of the
screen.
4
89