Configuring Adaptive Ap Firmware - Brocade Communications Systems RFS6000 System Reference Manual

4
6. To enable Secure Mode, click the Enable Secure Mode button to enable secure-mode to a set
7.
8. When using clustering and the Cluster GUI feature is enabled, a pull-down menu will be

Configuring Adaptive AP Firmware

Refer to the AP Firmware tab to view the Access Port and Adaptive AP firmware image associated
with each adopted Access Port or Adaptive AP. The screen allows you to update the firmware image
for Adaptive APs that associate with the switch.
To view AP firmware information:
1. Select Network > Access Port from the main menu tree.
2. Click the AP Firmware tab.
230
of APs. The AP's MAC Address and mode will be saved in the running configuration. If
secure-mode is set to enable, it means that WISP-e transactions for this AP will be secured.
To disable Secure Mode, click the Disable Secure Mode button to disable secure-mode to a set
of APs. The AP's MAC Address and mode will be saved in the running configuration. If
secure-mode is set to disable, it means that WISP-e transactions for this AP will not be
secured.
available to select which cluster members' APs are displayed. To view APs from all cluster
members, select All from the pull-down menu. To view APs radios from a specific cluster
member, select that member's IP address from the pull-down menu.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01