Configuring Access Point Radio Bandwidth - Brocade Communications Systems RFS6000 System Reference Manual

8. Refer to the Status field for the current state of the requests made from applet. This field
9. Click OK to use the changes to the running configuration and close the dialog.
10. Click Cancel to close the dialog without committing updates to the running configuration.

Configuring Access Point Radio Bandwidth

Refer to the Bandwidth tab to view the QoS weight associated with each radio when added to a
WLAN. The weight represents the switch priority assigned to the traffic transmitted from the radio
for the WLAN.
For information on revising the weight assigned to each radio in respect to its intended operation
within its assigned WLAN, see Editing the WLAN Configuration on page 4-109.
To view existing radio bandwidth weight settings:
1. Select Network > Access Port Radios from the main menu tree.
2. Click the Bandwidth tab.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
The ECW Max is combined with the ECW Min to make the Contention Window. From this range,
a random number is selected for the back off mechanism. Lower values are used for higher
priority (video or voice) traffic.
displays error messages if something goes wrong in the transaction between the applet and
the switch.
4
193