Configuring Wmm - Brocade Communications Systems RFS6000 System Reference Manual

4
4. Refer to the Packet Rates field to review the number of packets both transmitted (Tx) and
NOTE
The Brocade RF Management Software is recommended to plan the deployment of the switch.
Brocade RFMS can help optimize the positioning and configuration of a switch in respect to a
WLAN's client throughput requirements. For more information, refer to the Brocade Website.
5. Refer to the Retry Counts field to review the number of packets requiring retransmission from
6. Refer to the Status field for the current state of the requests made from applet. This field
7.
8. Click Close to close the dialog and return to the Network > Wireless LANs > Statistics screen.

Configuring WMM

Use the WMM tab to review a WLAN's current index (numerical identifier), SSID, description,
current enabled/disabled designation, and Access Category.
To view existing WMM Settings:
1. Select Network > Wireless LANs from the main menu tree.
146
received (Rx) at data rates from 1.0 to 54.0 Mbps. If a large number of packets are sent and
received at a slower data rate, then perhaps the switch is not adequately positioned or
configured to support the Clients within that WLAN.
the switch.
displays error messages if something goes wrong in the transaction between the applet and
the switch.
Click Refresh to update the Packet Rate and Retry Count data displayed within the screen.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01