Example
In this example, all classes of entries in the bridge-forwarding database are displayed.
Console# show bridge address-table
Aging time is 300 sec
interface
mac address
---------
--------------
1
00:60:70:4C:73:FF
1
00:60:70:8C:73:FF
200
00:10:0D:48:37:FF
show bridge address-table static
The show bridge address-table static Privileged EXEC mode command displays statically created entries in the
bridge-forwarding database.
Syntax
show bridge address-table static [vlan vlan] [ethernet interface | port-channel port-channel-number]
Parameters
•
vlan — Specifies a valid VLAN, such as VLAN 1.
•
interface — A valid Ethernet port.
•
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all static entries in the bridge-forwarding database are displayed.
Console# show bridge address-table static
Aging time is 300 sec
vlan
mac address
Port
----
5/e8
5/e8
5/e9
port
type
Page 39
Address Table Commands
Type
-------
dynamic
dynamic
static