Erase Factory-Default - Allied Telesis AR2050V Command Reference Manual

F C M
ILE AND ONFIGURATION ANAGEMENT
-
ERASE FACTORY DEFAULT

erase factory-default

Overview This command erases all data from NVS and all data from Flash excluding the
following:
•
•
•
The device is then rebooted and returned to its factory default condition. The
device can then be used for AMF automatic node recovery.
erase factory-default
Syntax
Mode Privileged Exec.
Usage This command is an alias to the
Example To erase data, use the command:
Node_1#
This command will erase all NVS, all flash contents except for
the boot release, and any license files, and then reboot the
switch. Continue? (y/n):y
Related atmf cleanup
Commands
C613-50186-01 Rev B
C
OMMANDS
the current release file
the backup release file
license files
erase factory-default
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
atmf cleanup command.
130