Reset Config; Show Ipif - D-Link DGS-1210-16 Reference Manual

Command Line Interface
DGS-1210-24:admin#reboot
Are you sure you want to proceed with the system reboot?(y/n) y
% Device will reboot, please wait a few minutes to re-login.
Success.
DGS-1210-24:admin#

reset config

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To reset all of the Switch's parameters to their default values:
DGS-1210-24:admin#reset config
% Device will reboot after reset configuration successfully.
DGS-1210-24:admin#

show ipif

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the IP interface settings:
This command is used to reset the Switch's configuration to the
factory default settings.
reset config
All the Switch's configurations will be reset to the default settings.
None.
None.
This command is used to display the configuration of the IP
interface on the Switch.
show ipif
The show ipif command displays the current IP interface
configuration of the switch.
None.
None.
1 1
1 1
D-Link Web Smart Switch User Manual
0
0