Cdm-570A/570Al Front Panel Operation - Overview; Cdm-570A Http Interface - Overview - Comtech EF Data CDM-570A Installation And Operation Manual

10.1.1 CDM-570A/570AL Front Panel Operation – Overview
See Chapter 6. FRONT PANEL OPERATION for an in-depth explanation of the
function and operation of the CDM-570A/570AL front panel.
1 LED Indicators
The LEDs show a summary status of modem operation. See Sect. 6.1.1.
2 Keypad
The keypad has six individual keys. The keys have a positive 'click' action that gives
tactile feedback. Use the keypad to enter data. See Sect. 6.1.2.
3 Vacuum Fluorescent Display (VFD)
The VFD shows data, menus, prompts and messages. The VFD is an active display with
adjustable brightness. It shows two lines of 40 characters each. Nested menus show all
available options and prompts that guide you in carrying out required actions. See Sect.
6.1.3.
10.1.2 CDM-570A HTTP Interface – Overview
See Chapter 7. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT for in-
depth explanations of the function and operation of the CDM-570A HTTP
Interface.
Ethernet-based Remote Product Management of the CDM-570A/570AL is available using one of
two rear panel RJ-45 10/100 BaseT Ethernet ports:

The 'M&C 100' 10/100 Ethernet port (for units without the
optional IP Packet Processor)
–or–

The 'Traffic 100' 10/100 Ethernet port (for units equipped
with the optional IP Packet Processor).
YOU MAY PROCEED WITH ETHERNET-BASED
REMOTE PRODUCT MANAGEMENT (WEB SERVER OR
SNMP) UNDER THE ASSUMPTIONS THAT:



ODU (Transceiver, BUC, LNB) Operation
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Figure 10-1. CDM-570A/570AL Front Panel Features
A compatible ODU is connected to the
CDM-570A/570AL.
The CDM-570A/570AL is operating with the
latest version firmware files.
The CDM-570A/570AL is connected to a
user-supplied, Windows-based PC, and:
10–2
Revision 5
MN-CDM570A