9.3.8.2.3
Satellite Modem > Monitor > BUC Status
Open the nested BUC Status page from the Monitor page.
Selection
BUC Voltage (volts)
BUC Current (mA)
BUC Firmware Version
BUC Temperature (deg C)
BUC PLL Alarm
9.3.8.2.4
Satellite Modem > Monitor > LNB Monitor
Open the nested LNB page from the Monitor page.
Selection
LNB Voltage (volts)
LNB Current (mA)
Optional Packet Processor - Serial/Telnet CLI Operation
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Figure 9-43. BUC Status
Hot Key
[RO]
Displays voltage, in volts.
[RO]
Displays current, in milliamps, from 0 to 4000.
[RO]
Displays the unit running firmware version.
[RO]
Displays the unit temperature, in degrees Celsius.
[RO]
Displays the Phase Lock Loop alarm status (e.g., Locked, Unlocked).
Figure 9-44. LNB Monitor (Per LNB)
Hot Key
[RO]
Displays voltage, in volts.
[RO]
Displays current, in milliamps, from 0 to 4000.
9–59
Description
Description
MN-CDM570A
Revision 5
Need help?
Do you have a question about the CDM-570A and is the answer not in the manual?
Questions and answers