Comtech EF Data CDM-570A Installation And Operation Manual page 622

This diagram shows where each protocol selection resides:
IP
Non IP
Selection of Source/Destination Ports should be done only if you are aware of the port usage of
the desired protocol or application. There are well known ports for various protocols, but often
only the 'command' messaging is transacted on these ports and the 'data' is transferred through a
negotiated port.
Use this table as a reference for some well-known port numbers:
Port Description
1 TCP Port Service Multiplexer (TCPMUX)
7 ECHO
20
FTP - Data
21
FTP - Control
22
SSH Remote Login Protocol
23 Telnet
25 Simple Mail Transfer Protocol (SMTP)
42 Host Name Server (Nameserv)
53 Domain Name System (DNS)
69
Trivial File Transfer Protocol (TFTP)
70
Gopher Services
80 HTTP
108 SNA Gateway Access Server
109 POP2
110 POP3
115 Simple File Transfer Protocol (SFTP)
Once the QoS Rules are defined, each type of traffic flow should be isolated
and sent to verify that it is being sent in the intended QoS Rule.
WRED – When WRED is enabled for a specific queue, QoS randomly drops packets after
reaching 50% of the QoS queue.
Advanced Quality of Service (QoS) Option
CDM-570A/570AL Satellite Modem with Optional Packet Processor
UDP
RTP
TCP
1080
L–4
VOCE SNMP
VDEO
RTPS FTP
TELN SMTP
ORCL CTRX
Port Description
118 SQL Services
119 Newsgroup (NNTP)
137
NetBIOS Name Service
139
NetBIOS Datagram Service
150
NetBIOS Session Service
156 SQL Server
161 SNMP
179 Border Gateway Protocol (BGP)
190 Gateway Access Control Protocol (GACP)
197
Directory Location Service (DLS)
396
Novell Netware over IP
443 HTTPS
444 Simple Network Paging Protocol (SNPP)
546 DHCP Client
547 DHCP Server
Socks
Revision 5
HTTP
SAP
SQL
MN-CDM570A