Comtech EF Data CDM-570A Installation And Operation Manual page 321

Command
Parameter (Instruction
Type Code and
Qualifier)
CnC-APC Bit N/A 4 bytes
Error Rate
CnC-APC BER ABR= None
Reset
CnC-APC N/A 4 bytes
Frame Error
Rate
CnC-APC FER AFR= None
Reset
CnC-APC APC= 1 byte, 0 thru 2
Activate/Suspend
Serial-based Remote Product Management
Arguments for
Command or
Response to
Query
Query only.
Valid only in CDM-570A Compatible Mode (CMO=1).
Returns the value of CnC-APC BER in the form xE
x = value
E = Exponent.
-c
Returns 9999 if unit is not in CnC-APC mode or if there is an APC frame sync
error.
BER is measured in frame UW.
Example: <0/ABE?
>0/ABE=8E-5
Command only.
Valid only in CDM-570A Compatible Mode (CMO=1).
This command takes no arguments.
Restarts CnC-APC BER measurement.
Query only.
Valid only in CDM-570A Compatible Mode (CMO=1).
Returns the value of CnC-APC FER in the form xE
x = value
E = Exponent.
-c
Returns 9999 if modem is not in CnC-APC mode or if there is an APC frame sync
error.
Example: <0/AFE?
>0/AFE=8E-2
Command only.
Valid only in CDM-570A Compatible Mode (CMO=1).
This command takes no arguments.
Restarts CnC-APC FER measurement.
Command only.
Valid only in CDM-570A Compatible Mode (CMO=1).
Activates or suspends APC operation in the form x, where:
0 = no action
1 = Activate APC
2 = Suspend APC
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Description of Arguments
, where:
-c
, where:
-c
8–55
Revision 5
Query
Response to
(Instruction Code
Command
and Qualifier)
N/A ABE? ABE= xE
(see Description of
Arguments)
ABR= N/A N/A
N/A AFE? AFE= xE
Description of
Arguments)
AFR= N/A N/A
APC= N/A N/A
MN-CDM570A
Response to
Query
-c
(see
- c