Updating Firmware
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Using the CDM-570A HTTP Interface (via the User PC Web Browser – this
assumes that you have already noted the Traffic/Management IP Address,
which was previously required to open the CDM-570A HTTP Interface):
•
Base Modem Firmware Info – Use the 'Admin | Firmware | Modem' page,
as shown in this example:
•
Packet Processor Firmware Info – Use the 'Admin | Firmware | Packet
Processor' page, as shown in this example:
•
Ethernet IP Address – Use the 'Configuration | LAN' page to view the IP
Address/Mask, as shown in this example:
4–5
Revision 5
MN-CDM570A
Need help?
Do you have a question about the CDM-570A and is the answer not in the manual?
Questions and answers