Comtech EF Data CDM-570A Installation And Operation Manual page 115

3. Contact Comtech EF Data Product Support to order features:
a. Provide the unit Serial Number to the Product Support representative.
b. Identify and purchase the desired FAST option(s).
c. Obtain the invoice, the register-specific 20-digit FAST Access Code(s), and the
FAST option activation instructions.
4. Activate your purchased FAST features.
a. In the FAST code section of the 'Admin | FAST' page, carefully enter the register-
specific 20-character FAST Access Code into its designated text box (Register 1 or
Register 2) (each FAST Access Code is submitted separately). Click [Submit].
b. The message "Configured Successfully" appears at the top of the FAST code
section if the FAST upgrade is accepted; the modem then resets to its newly-
incorporated default configuration.
However, if an invalid code is entered, either of the following messages may appear
instead:
Repeat the FAST Access Code entry procedure. Should the code entry error persist,
contact Comtech EF Data Product Support for further assistance.
FAST Activation Procedure
CDM-570A/570AL Satellite Modem with Optional Packet Processor
When a FAST Access Code is obtained from Comtech EF Data, it will be
for a specific option register. The FAST options are linked to two option
registers:
•
Register1 is for Data Rate, L-Band, and Framing options.
•
Register2 is for Modulation type and Packet Processor options.
5–5
Revision 5
MN-CDM570A