Satellite Modem > Utilities - Comtech EF Data CDM-570A Installation And Operation Manual

9.3.8.4 Satellite Modem > Utilities
Open the nested Utilities page from the Satellite Modem page.
Selection
Time
Date
Circuit ID
Local/Remote State
Compatibility Mode
Demo Mode
Load Configuration
Store Configuration
Carrier ID Configuration
Optional Packet Processor - Serial/Telnet CLI Operation
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Figure 9-47. Satellite Modem > Utilities
Hot Key
T
Set the time in MM:HH:SS format.
D
Set the date in DD/MM/YY format.
Set a 24-character Circuit ID (unit label). Allowable characters are:
I
[Space] ( ) * + - . / 0 through 9 and A through Z
Select the operating state:
1 – Local
R
2 – Remote-Serial
3 – Remote-Ethernet
Select the Compatibility Mode:
C 1 – CDM-570 Mode
2 – CDM-570A Mode
Select the Demo Mode:
1 – Disabled
2 – Enabled
M
3 – Expired
The time remaining for the 30-day demonstration period decrements until
the time is Expired.
G
Load or Store (save) one of 10 different modem configurations – 0
O through 9.
Select to configure the Carrier ID.
A
See Section 0.
9–61
Description
MN-CDM570A
Revision 5