Comtech EF Data CDM-570A Installation And Operation Manual page 103

b. Use Windows Explorer to create and rename the temporary folder.
c. Use the 'Run' and 'Browse' windows to create and rename the temporary folder.
d. Use Windows Command-line to create the temporary folder.
Updating Firmware
CDM-570A/570AL Satellite Modem with Optional Packet Processor
•
Select File > New > Folder to create a temporary folder. This creates the
new folder in the active folder.
•
Right-click the "New Folder" folder name, and then rename this folder to
"temp" or some other convenient, unused name:
•
Select [Start] on the Windows taskbar, and then click the Run... icon. This
opens the 'Run' window.
•
Click [Browse] in the 'Run' window. This opens the 'Browse' window.
•
Click the Create New Folder icon in the 'Browse' window. This creates the
new folder.
•
Right-click the "New Folder" folder name, and then rename this folder to
"temp" or some other convenient, unused name:
•
First, click [Start] on the Windows taskbar, and then click the Run... icon (or,
depending on Windows OS versions prior to Windows 95, click the MS-DOS
Prompt icon from the Main Menu).
•
Next, open a Command-line window...
For Windows 95 or Windows 98, type "command" (or, for any Windows
o
OS versions later than Windows 98, type "cmd" or "command"):
4–7
Revision 5
MN-CDM570A