Satellite Modem > Configuration > Buc (Block Up Converter) Configuration - Comtech EF Data CDM-570A Installation And Operation Manual

70/140 mhz/l-band/reduced chassis depth/with optional high performance packet processor
Hide thumbs Also See for CDM-570A:
Table of Contents

Advertisement

9.3.8.1.7
Satellite Modem > Configuration > BUC (Block Up Converter)
Configuration
Open the nested Block Up Converter (BUC) Configuration page from the Configuration page.
Selection
BUC Address
BUC Communications
BUC RF Output
BUC DC Power
BUC 10 MHz Reference
BUC Current Alarm Upper
Limit (mA)
BUC Current Alarm Lower
Limit (mA)
BUC LO Frequency (MHz)
Optional Packet Processor - Serial/Telnet CLI Operation
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Figure 9-36. BUC (Block Up Converter) Configuration
Hot Key
A
Set an address for the BUC in the range from 1 to 15.
M
R
Toggle to set operation as Enabled or Disabled.
W
P
H
Set a value in the range from 500 to 4000.
C
Set a value in the range from 0 to 3000.
F
Set a value in the range from 3000 to 65000. Set this value to 0 to
disable.
Description
9–52
Revision 5
MN-CDM570A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cdm-570alCdmr-570al

Table of Contents