Use Front Panel Operation To Find The Management Ip Address; Use Front Panel Operation To Find The Firmware Information; Use The Serial Interface To Find The Firmware Information - Comtech EF Data SLM-5650A Installation And Operation Manual

5.2.3.1

Use Front Panel Operation to Find the Management IP Address

Ethernet IP Address/Range:
You may view the assigned Management IP Address on the SELECT: Configure Remote 
EthernetConfig  IP Address/Range screen.
5.2.3.2

Use Front Panel Operation to Find the Firmware Information

You may view the base modem running M&C version at the top level screen. Press the CLEAR
key several times to view this information.
The detailed firmware information can be found within the SELECT: Utility  Firmware 
Information  Image#1 or Image#2  Bulk nested submenus.
Examples of these screens are as follows:
Comtech SLM-5650A Modem
Firmware Version x.x.x
Bulk #1:
5.2.3.3

Use the Serial Interface to Find the Firmware Information

Use your terminal emulator to execute remote queries with the modem. Use the "SWR" remote
query to find the firmware information:
<0/SWR?{CR}
(returns the firmware version numbers running under Boot, Bulk1, and Bulk2, in the form
Boot:xx.yy.zz Bulk1:xx.yy.zz Bulk2:xx.yy.zz)
Firmware Update
192.168.001.001/24
FW-0000030XX,MM/DD/YY,1.4.X
5–5
SLM-5650A Satellite Modem
(E)
State: GO
Mode: TURBO
Revision 10
MN-SLM-5650A