d. Identify the firmware information and Ethernet Traffic (M&C) IP Address using
Updating Firmware
CDM-570A/570AL Satellite Modem with Optional Packet Processor
one of the following methods:
•
Chapter 6. FRONT PANEL OPERATION
•
Chapter 7. ETHERNET-BASED REMOTE PRODUCT
MANAGEMENT
•
Chapter 8. SERIAL-BASED REMOTE PRODUCT
MANAGEMENT
Using the CDM-570A/570AL Front Panel menus:
•
Base Modem Firmware Info – Use the SELECT: UTIL Firmware Info
Image#1 or Image#2 Bulk menu branches, as shown in this example:
Bulk#1:
FW-0020683*
•
Packet Processor Firmware Info – Use the SELECT: UTIL Firmware
Info PaP menu branches, as shown in this example:
PaP:
FW-0020781*
•
Ethernet IP Address – Use the CONFIG: Rem Ethernet Address
menu branch, as shown in this example:
Ether IP Address/Range:
192.168.001.011/24 ◄ ►,▲▼
MM/DD/YY
#.#.#
MM/DD/YY
#.#.#
4–4
Revision 5
MN-CDM570A