Util: Fast) Cnfg (Fast Configuration); Util: Fast) View - Comtech EF Data CDM-570A Installation And Operation Manual

6.3.7.8.1

(UTIL: FAST) Cnfg (FAST Configuration)

FAST Configuration:
Edit Code
◄ ►
Use the arrow keys to select Edit Code or Demo Mode. Press ENTER.
(UTIL: FAST) FAST Configuration  Edit Code
See Chapter 5. FAST ACTIVATION PROCEDURE for further information.
FAST: Edit register 2
00000000000000000000 ENT
(UTIL: FAST) FAST Configuration  Demo Mode
FAST Demo Mode: Off
2592000 seconds remain
◄ ►
Use the
Demo Mode allows access to ALL modem FAST options for 2592000 seconds (30 calendar
days). Once you turn Demo Mode On, the available time decrements and the bottom line of
the display shows the number of available seconds remaining for the free Demo Mode. You
may turn Demo Mode Off and On as needed until this time expires.
When the Demo period expires, the following message displays:
FAST Demo Mode: Off
Demo Period Expired
6.3.7.8.2

(UTIL: FAST) View

View Options: 03
150W BPSU
Use the ▲▼arrow keys to view which FAST options are currently installed or available.
The top line displays the Option Number.
Front Panel Operation
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Demo Mode
arrow keys to select FAST Demo Mode as Off or On. Press ENTER.
IF THE DEMO MODE STATE (OFF/ON) IS CHANGED, OR IF DEMO MODE IS
ENABLED AND THE TIMER EXPIRES, THE MODEM FIRMWARE WILL
REBOOT AUTOMATICALLY AFTER 5 SECONDS.
NOTE THAT VALIDATION OF AUTHORIZED FAST OPTIONS OCCURS ON
AUTO-REBOOT; IF AN INVALID CONFIGURATION IS FOUND, THE MODEM
CONFIGURATION WILL RESET TO ITS FAXTORY DEFAULT VALUES.
(▲ ▼)
Not Installed
On
On
6–69
Revision 5
MN-CDM570A