Chapter 3. Rear Panel Connectors And Pinouts; Overview - Cabling Connection Types - Comtech EF Data CDM-570A Installation And Operation Manual

CONNECTORS
3.1 Overview – Cabling Connection Types
The CDM-570A/570AL and CDMR-570AL Satellite Modems, with or without the optional High-
Performance Packet Processor, use a number of different cables. Each cable type is typically
dedicated to a specific mode of operation.
1. Not all of these operational interface types may be available.
2. The European EMC Directive (EN55022, EN50082-1) requires using properly
Rear Panel Connectors and Pinouts
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Chapter 3. REAR PANEL
shielded cables for DATA I/O. These cables must be double-shielded from
end-to-end, ensuring a continuous ground shield.
AND
3–1
Revision 5
PINOUTS
MN-CDM570A