Operations And Maintenance > Database Operations - Comtech EF Data CDM-570A Installation And Operation Manual

9.3.10.4 Operations and Maintenance > Database Operations
Open the nested Database Operations page from the Operations and Maintenance page. Use
this page to view, save, or erase an existing user configuration of the Packet Processor. An
Packet Processor uses these types of configuration files to initialize itself on power-up.
The modem uses the User Configuration File to overwrite the values defined in the Factory
Configuration file. This allows full customization of an Packet Processor without erasing the
factory-defined parameters set.
The User Configuration File can also be retrieved or overwritten via FTP by
specifying the filename 'param1'.
Selection
Restore Factory Default
Load Parameters from
permanent storage
Automatically Save
PARAM after CONFIG
change
Optional Packet Processor - Serial/Telnet CLI Operation
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Figure 9-65. Database Operations
Hot Key
Restores the Packet Processor configured settings to "safe" values as
R
established at the factory.
If you answer "Y" from the prompt, "
load parameters [Y/N]?
P
of the Packet Processor with the configuration last saved to permanent
storage. This performs an "undo" type operation if the user puts the
Packet Processor into an undesirable state.
Toggle "Yes" to automatically save any configuration changes, including
A
changes made from the modem front panel.
9–83
Description
Are you sure you want to
",this overwrites the current configuration
MN-CDM570A
Revision 5