Comtech EF Data CDM-570A Installation And Operation Manual page 325

Command
Parameter (Instruction
Type Code and
Qualifier)
BUC 10 MHz BFR= 1 byte,
Reference value of 0 or 1
BUC LO Frequency BLO= 6 bytes
BUC Output BOE= 1 byte,
Enable value of 0 or 1
BUC Output Power N/A 4 bytes
Level
BUC PLL Alarm N/A 1 byte,
value of 0 or 1
BUC Power Control BPC= 1 byte,
value of 0 or 1
Serial-based Remote Product Management
Arguments for
Command or
Response to
Query
Command or Query.
Sets or returns BUC 10 MHz frequency reference, where:
0 = Disabled
1 = Enabled
Example: <0/BFR=0 (BUC 10MHz reference disabled)
Command or Query.
Sets or returns BUC Tx LO frequency information in the form xxxxxs, where:
xxxxx = LO frequency, in the range from 3000 to 65000 MHz.( All 0's (000000)
disables the feature)
s = sign for the mix (+ or –)
Note: Terminal Frequency = BUC LO ± TFQ
Example: <0/BLO = 12000+ (BUC LO is 12 GHz, low-side mix)
Command or Query.
Sets or returns BUC Output in ther form x, where:
0 = Off (output disabled)
1 = On (output enabled)
Example: <0/BOE=1 (BUC output is enabled)
Query only.
Returns BUC Output Power Level, in Watts, in the form xx.x.
Returns 00.0 when FSK and BUC power are not enabled.
Example: <0/BOL?
>0/BOL=08.3 (BUC reports output power is 8.3 Watts)
Query only.
Returns BUC PLL lock state in the form x, where:
1 = Unlocked
0 = Locked
When unavailable, response is 9.
Note: Command valid only when the FSK and BUC power are turned On.
Example: <0/BPA?
<0/BPA=0 (BUC PLL is locked)
Command or Query – CDM-570L only.
0 = Disable BUC DC Power
1 = Enable BUC DC Power
Example: <0/BPC=0 (BUC DC power disabled)
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Description of Arguments
8–59
Revision 5
Query
Response to
(Instruction Code
Command
and Qualifier)
BFR= BFR? BFR=x
BFR? (see Description of
BFR* Arguments)
BFR#
BLO= BLO? BLO=xxxxxs
BLO? (see Description of
BLO* Arguments)
BLO#
BOE= BOE? BOE=x
BOE? (see Description of
BOE* Arguments)
BOE#
N/A BOL? BOL=xx.x
(see Description of
Arguments)
N/A BPA? BPA=x
(see Description of
Arguments)
BPC= BPC? BPC=x
BPC? (see Description of
BPC* Arguments)
BPC#
MN-CDM570A
Response to
Query