Fully Accessible System Topology (Fast) - Comtech EF Data CDM-570A Installation And Operation Manual

1.2.9

Fully Accessible System Topology (FAST)

Chapter 5. FAST ACTIVATION PROCEDURE
The modem incorporates a number of optional features. In order to permit a lower initial cost, you
may purchase the modem enabled with only the desired features.
If you wish to upgrade the functionality of a modem at a later date, Comtech EF Data provides
FAST, which permits the purchase and activation of options through special authorization codes.
You may contact Comtech EF Data Product Support to purchase these unique, register-specific
FAST Access Codes, and then load these codes into the modem using the front panel keypad.
See Table 1-1 for the standard (base modem) versus FAST and FAST-accessible hardware
options available for the modem. You may order hardware options for basic modems for
installation either at the factory or in the field. You can easily activate these options in the field.
Introduction
CDM-570A/570AL Satellite Modem with Optional Packet Processor
1–11
Revision 5
MN-CDM570A