Admin | Firmware; Admin | Firmware | Modem - Comtech EF Data CDM-570A Installation And Operation Manual

Features – Optional
•
Chapter 5. FAST ACTIVATION PROCEDURE
•
Sect. 7.3 Admin | FAST Page
When an optional FAST feature is not available, its associated drop-down list
appears dimmed and is non-selectable.
Use the drop-down lists to set operation as Enabled or Disabled:
• IGMP
• Vipersat STDMA
•
VMS v3.x.x VIPERSAT Management System User Guide (CEFD P/N
MN/22156)
•
Vipersat CDM-570/570L Satellite Network Modem User Guide (CEFD P/N
MN/22125)
Click [Submit] to save.
Features – CDM-570A
Payload Comp Type – At present, ALDC is the only payload compression type available.
Number of System Flows – Use the drop-down list to select 20,000 or 64,000.
Click [Submit] to save.
Make sure to also click [Save PaP Parameters] on the 'Admin | PaP Save' page
before proceeding further.
7.4.3.2.5

Admin | Firmware

Chapter 4. UPDATING FIRMWARE
Click the Modem or Packet Processor tab to continue.
7.4.3.2.5.1

Admin | Firmware | Modem

This page displays read-only information sections about the base modem's Boot (Bootrom) and
two operational firmware images.
Ethernet-based Remote Product Management
CDM-570A/570AL Satellite Modem with Optional Packet Processor
• L3/L4/L5 Rx Header Compression
• Vipersat File Streamer
7–21
• Vipersat Management
• Vipersat Auto Switching
MN-CDM570A
Revision 5