(CONFIG: TI) G703 T1
T1 Configuration: Length
Line-Code
◄ ►
Use the
(CONFIG: TI) G.703: T1 Length
T1 Line Length:
000-133 feet (▲ ▼,ENTER)
The valid length spans, in feet, are 0-133, 133-266, 266-399, 399-533, or 533-655.
Use the ▲▼arrow keys to select the desired span. Press ENTER.
(CONFIG: TI) G.703: T1 Line-Code
T1 Line Code (B8ZS):
On
Use the
(CONFIG: TI) G.703 E1-Bal or E1-Unbal
E1 Line Code (HDB3):
On
Off
When you select E1-Bal or E1-Unbal, the modem displays this typical submenu.
◄ ►
Use the
6.3.2.7.4
IP-ACM (VersaFEC ACM)
This selection is functional only when the optional Packet Processor is installed.
ACM:ModCod Unlock-Action
Target-SNR-Margin
◄ ►
Use the
arrow keys to select a parameter. Press ENTER.
(CONFIG: TI) IP-ACM ModCod
Min ModCod:00 16QAM .488
Max ModCod:11 16QAM .853
Front Panel Operation
CDM-570A/570AL Satellite Modem with Optional Packet Processor
(◄ ►,ENTER)
arrow keys to select Length or Line Code. Press ENTER.
Off(AMI) (◄ ►,ENTER)
◄ ►
arrow keys to select On or Off. Press ENTER.
(◄ ►,ENTER)
arrow keys to set operation as On or Off. Press ENTER.
6–39
Revision 5
MN-CDM570A