Comtech EF Data CDM-570A Installation And Operation Manual page 127

(CONFIG: Remote Control) Ethernet: SNMP
SNMP: Communities
◄ ►
Use the
(CONFIG: Remote Control) Ethernet: SNMP  Communities
SNMP Communities:
Read
Use the
(CONFIG: Remote Control) Ethernet: SNMP  Communities
 Read
Read Community: (◄ ►,▲ ▼)
public
(CONFIG: Remote Control) Ethernet: SNMP  Communities
 Write
Write Community: (◄ ►,▲ ▼)
private
To edit the SNMP Read or Write Community strings, use the
a character to edit. Then, use the ▲▼arrow keys to edit that character. Note that only
the first 20 characters on the bottom line are available.
All printable ASCII characters are available with the exception of the backslash '/'
(ASCII code 92) and tilde '~' (ASCII code 126).
Press ENTER once you compose the string – the modem removes all trailing spaces
from the string upon entry.
(CONFIG: Remote Control) Ethernet: SNMP  Traps
Traps: Community Version
IP Addr#1 IP Addr#2
Use the
(CONFIG: Remote Control) Ethernet: SNMP  Traps 
Community
Trap Community: (◄ ►,▲ ▼)
comtech
Front Panel Operation
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Traps
(◄ ►, ENT)
arrow keys to select a parameter. Press ENTER.
Write (◄ ►, ENT)
◄ ►
arrow keys to select a parameter. Press ENTER.
◄ ►
arrow keys to select a parameter. Press ENTER.
(◄ ►)
6–11
Revision 5
◄ ►
arrow keys to select
MN-CDM570A