9.3.2.10 Administration > Telnet Timeout
The Packet Processor does not allow concurrent access to the CLI via Telnet
and the 'Console' port. If you connect via Telnet, the Packet Processor
automatically disables the 'Console' port for the duration of the Telnet session.
You may use Hot Key 'L' (Telnet Logout) from any CLI page to end a Telnet
session.
You may configure the Packet Processor to automatically end a Telnet session after a specified
period of inactivity (configurable from 1 to 60 minutes).
Optional Packet Processor - Serial/Telnet CLI Operation
CDM-570A/570AL Satellite Modem with Optional Packet Processor
9–18
Revision 5
MN-CDM570A