Comtech EF Data CDM-570A Installation And Operation Manual page 301

Command
Parameter (Instruction
Type Code and
Qualifier)
Tx BERT TBP= 1 byte
Pattern
Rx BERT RBP= 1 byte
Pattern
BERT Error Insert BKE= 1 byte, value of
0 or 1
BERT Restart BRM= None
Monitor
BERT Result N/A 8 bytes
in bit errors
Serial-based Remote Product Management
Arguments for
Command or
Response to
Query
Command or Query.
Valid only in CDM-570A Compatible Mode (CMO=1).
Sets or returns Tx BERT Pattern, in the form x, where:
0=1:1
1=2047
2=2^15-1
3=2^23-1
Example: <0/TBP=1 (Tx BERT Pattern is 2047)
Command or Query.
Valid only in CDM-570A Compatible Mode (CMO=1).
Sets or returns Rx BERT Pattern, in the form x, where:
0=1:1
1=2047
2=2^15-1
3=2^23-1
Example: <0/RBP=1 (Rx BERT Pattern is 2047)
Command only.
Valid only in CDM-570A Compatible Mode (CMO=1).
Inserts 1 error in the form x, where:
x=1
Example: <0/BKE=1
Command only.
Valid only in CDM-570A Compatible Mode (CMO=1).
This command takes no arguments.
Restarts the BERT Monitor.
Example: <0/BRM=
Query only.
Valid only in CDM-570A Compatible Mode (CMO=1).
Returns BERT monitor results in bit errors, in the form x.xxE+yy
Example: <0/BRE?
>0/BRE=8.70E+05
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Description of Arguments
8–35
Revision 5
Query
Response to
(Instruction Code
Command
and Qualifier)
TBP= TBP? TBP=x
TBP? (see Description of
TBP# Arguments)
RBP= RBP? RBP=x
RBP? (see Description of
RBP# Arguments)
BKE= N/A BKE=x
BKE? (see Description of
BKE# Arguments)
BRM= N/A N/A
N/A BRE? BRE=x.xxE+yy
MN-CDM570A
Response to
Query