1:1 Redundancy In Router Mode - Comtech EF Data CDM-570A Installation And Operation Manual

70/140 mhz/l-band/reduced chassis depth/with optional high performance packet processor

Hide thumbs Also See for CDM-570A:

Table of Contents

1:1 Redundancy in Router Mode

In Router Mode:

If Dedicated Management Port is enabled before 1:1 Redundancy is

enabled, no special configuration is required. 1:1 Redundancy will use the

Management IP Address for redundancy communications between the

online and standby modems. The Traffic IP Address will be used as the

Traffic IP Address only – the online modem configures the Traffic IP

If 1:1 Redundancy is enabled before Dedicated Management Port is

enabled, no special configuration is required. Dedicated Management Port

will use the Management IP Address as the Management IP Address. The

Traffic IP Address will be used as the Traffic IP Address.

Whether only Dedicated Management is enabled, or only 1:1 Redundancy is enabled, or both are

enabled, you are required to configure both the Management and Traffic IP Addresses. Both

Dedicated Management Port and 1:1 Redundancy use the Management IP Address for M&C

traffic, and the Traffic IP Address for Ethernet data traffic. No special configuration is otherwise

Dedicated Management Port Feature

CDM-570A/570A Satellite Modem with Optional Packet Processor

Show Quick Links

Table of Contents

Cdm-570al Cdmr-570al