Comtech EF Data CDM-570A Installation And Operation Manual page 252

Events Log
•
Read Next Five Events – Click to buffer the next group of five stored events into the
scrollable, read-only events window.
•
Clear Events Log – Click to erase all entries from the stored events log.
•
Initialize Events Pointer – Click to reset the Event Log's internal pointer.
Click [Submit] to save.
•
Unread Events – This scrollable, read-only window displays the total number of unread
stored events. As stored event groups are displayed, the counter decrements
accordingly.
Statistics Log
If you change your operating mode between Non-ACM and ACM (VersaFEC ACM
(IP-ACM) or VersaFEC-2 ACM (V2-ACM)) mode, Comtech EF Data recommends
that you execute the Clear Statistics Log feature before retrieving any further
statistics.
•
Read Next Five Statistics – Click to buffer the next group of five stored events into the
scrollable, read-only statistics window.
•
Clear Statistics Log – Click to erase all entries from the stored Statistics Log.
•
Initialize Statistics Pointer – Click to reset the Statistics Log's internal pointer.
Click [Submit] to save.
•
Unread Statistics – This scrollable, read-only window displays the total number of
unread stored statistics. As stored statistics are displayed, the counter decrements
accordingly.
Alarm Mask
Use the available option buttons to designate an alarm as Masked or Active. Click [Submit
Alarm Mask] to save.
Ethernet-based Remote Product Management
CDM-570A/570AL Satellite Modem with Optional Packet Processor
7–64
Revision 5
MN-CDM570A