9.3.2
Administration
Access to the Administration page is restricted to the Admin user when connecting
via the Telnet CLI or HTTP interfaces. The Administration page is available via the
Serial CLI connection because this interface requires no user login.
Open the Administration page from the Main Menu.
Selection
Name/Password Configuration
Access Lists
Feature Configuration
3xDES Configuration
SNMP Configuration
Working Mode
Managed Switch Multicast Option
Header comp refresh rate (in pkts)
for UDP/RTP1
Header comp refresh rate (in pkts)
for UDP
Header comp refresh rate (in pkts)
for all others
Payload comp refresh rate (in pkts)
Telnet Timeout
Optional Packet Processor - Serial/Telnet CLI Operation
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Figure 9-3. Administration
Hot Key
Use this page to define the User Name and Passwords that
P
are required in order to access the management interfaces.
See Section 9.3.2.1.
Use this page to restrict access to the management interfaces
A
based upon the requester's IP address. See Section 9.3.2.2.
Use this page to access the Feature Configuration options.
F
See Section 9.3.2.3.
Use this page to access the 3xDEC Configuration options.
D
See Section 9.3.2.4.
Use this page to configure the SNMP Configuration options.
N
See Section 9.3.2.5.
Use this page to set the Working Mode. See Appendix D for
C
additional information. See Section 9.3.2.6.
Select E to toggle [Enabled] or [Disabled].
E
See Section 9.3.2.7.
H
See Section 9.3.2.8.
U
See Section 9.3.2.8.
O
See Section 9.3.2.8.
Q
See Section 9.3.2.9.
T
See Section 9.3.2.10.
9–8
Revision 5
Description
MN-CDM570A
Need help?
Do you have a question about the CDM-570A and is the answer not in the manual?
Questions and answers