Monitor: Live Alarms) Unit; Monitor: Live Alarms) Receive (Receive Traffic Status); Monitor: Live Alarms) Transmit (Transmit Traffic Status); Monitor: Rx - Comtech EF Data CDM-570A Installation And Operation Manual

6.3.3.1.1

(MONITOR: Live Alarms) Unit

Unit Fault: -12 Volt PSU
is Under-Voltage
This screen displays Unit Faults. If none are present, it displays 'None'. Press ENTER to return to
the previous menu.
6.3.3.1.2

(MONITOR: Live Alarms) Receive (Receive Traffic Status)

Rx Traffic: AGC Alarm -
Reduce Input level (ENT)
This screen displays Receive Traffic Faults. If none are present, it displays 'None'. Press ENTER
to return to the previous menu.
6.3.3.1.3

(MONITOR: Live Alarms) Transmit (Transmit Traffic Status)

Tx Traffic: No Tx Clock
from Terrestrial (ENT)
This screen displays Transmit Traffic Faults. If none are present, it displays 'None'. Press ENTER
to return to the previous menu.
6.3.3.2

MONITOR: Rx

EbNo>16.0dB
ΔF=0.0k
With VersaFEC ACM (IP-ACM) or VersaFEC-2 ACM (V2-ACM) mode active:
SNR=22.0dB
ΔF=+0.0k Buf=50 RSL=-49
Front Panel Operation
CDM-570A/570AL Satellite Modem with Optional Packet Processor
(ENT)
BER=0.0E-9
Buf=50 RSL=-42
BER=0.0E-9
6–48
Revision 5
MN-CDM570A