Supporting Hardware And Software; Cdm-570Al/Cdmr-570Al L-Band Redundancy; Cdm-570A 70/140 Mhz Redundancy; Support Software - Comtech EF Data CDM-570A Installation And Operation Manual

70/140 mhz/l-band/reduced chassis depth/with optional high performance packet processor

Hide thumbs Also See for CDM-570A:

Table of Contents

1.2.10 Supporting Hardware and Software

For 1:1 applications, the modem is supported by the low-cost external CRS-170A L-Band 1:1

Redundancy Switch.

For Hub applications, the modem is supported by the low-cost external CRS-300 1:N

Redundancy Switch coupled with the CRS-280L (L-Band) Redundancy Switch.

For 1:1 applications, the modem is supported by the low-cost external CRS-180 70/140MHz 1:1

Redundancy Switch.

For Hub applications, the modem is supported by the low-cost external CRS-300 1:N

Redundancy Switch coupled with the CRS-280 IF (70/140 MHz) Switch.

The modem is supported by Comtech EF Data's Satellite system Monitor and Control (SatMac)

Version 4.7 software, a Windows

the complete system of Comtech EF Data equipment (comprising Modems, Transceivers, and

Redundancy Switches).

Contact Comtech EF Data Product Support for more information or to order a free demo disk.

SatMac is also available for download from the M&C Utilities link on Comtech EF Data's website.

Introduction

CDM-570A/570AL Satellite Modem with Optional Packet Processor

-based application that provides a 'point and click' interface for

Show Quick Links

Table of Contents