Common 'Odu Select' Submenu; Odu Select:) Config - Comtech EF Data CDM-570A Installation And Operation Manual

10.2.1.2.1.1.1 COMMON 'ODU SELECT' SUBMENU

(ODU: Transceiver Control) Enable►Standalone►
(ODU: Transceiver Control) Enable►1:1 ► CSAT#1 ►
(ODU: Transceiver Control) Enable►1:1 ► CSAT#2 ►
ODU SELECT: Config
Monitor Alarms (
Use the ◄ ► arrow keys to select Config, Info, Monitor, or Alarms, and then press ENTER.
10.2.1.2.1.1.1.1
ODU CONFIG: Transmitter
Receiver Misc
Use the ◄ ► arrow keys to select Transmitter, Receiver, or Misc, and then press ENTER.
(ODU CONFIG:) Transmitter
ODU TX: Frequency Atten
Amplifier Mute Slope
Use the ◄ ► arrow keys to select Frequency, Atten, Amplifier, Mute, or Slope, and then
press ENTER.
(ODU CONFIG ► ODU TX:) Frequency
ODU Tx Frequency:
5912.5 MHz (
To edit the transmit frequency: First, use the ◄ ► arrow keys to select a digit, and then
use the ▲▼arrow keys to change the value of that digit. Press ENTER when done.
(ODU CONFIG ► ODU TX:) Atten (Attenuation)
ODU Tx Attenuation:
15.00 dB
To edit the transmit attenuation: First, use the ◄ ► arrow keys to select a digit, and then
use the ▲▼arrow keys to change the value of that digit. Press ENTER when done.
(ODU CONFIG ► ODU TX:) Amplifier
ODU Tx Amp State:
On
Use the ◄ ► arrow keys to select On or Off, and then press ENTER.
ODU (Transceiver, BUC, LNB) Operation
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Info
◄ ►
,ENT)

(ODU SELECT:) Config

◄ ►
( ,ENT)
◄ ►
◄ ►,▲ ▼,
ENT)
(◄ ►,▲ ▼,ENT)
Off (◄ ►,ENT)
10–10
Revision 5
MN-CDM570A