Comtech EF Data CDM-570A Installation And Operation Manual page 637

M&C is accomplished as follows:
•
Selection – This is the function or command as it appears on the menu page.
•
Hot Key – This is the letter or number assigned as the keystroke/mnemonic for execution
of a menu function or command.
Where this column specifies [RO], this means that this line item is a read-only
(informational) feature. No user input is available.
•
Description – This is the detailed explanation of the function or command. You are
instructed to take a specific action here:
When you are instructed to "set" a feature, this means that you are prompted to type
o
the numerical value for that feature. Press [Enter] to execute configuration. User
guidance to "set" a value within a permitted range (from a minimum value to a
maximum value) is commonly provided in parentheses or brackets.
When you are instructed to "select" a feature, this means that a numbered list of
o
choices is commonly provided. Type the number to execute your operational
selection. Press [Enter] to execute configuration.
When you are instructed to "toggle" a feature, this generally means that pressing the
o
Hot Key executes one of two operating states for that feature (e.g., Enabled or
Disabled, On or Off, Auto or Manual, etc.). The feature line will dynamically update to
display, in brackets, its updated and current operating state.
1:1 IP Redundancy
CDM-570A/570AL Satellite Modem with Optional Packet Processor
N–3
Revision 5
MN-CDM570A