Operations And Maintenance - Comtech EF Data CDM-570A Installation And Operation Manual

Selection
Management IP Address
(Redundant Unit)
Management Subnet
Prefix Length (Redundant
Unit)
Force Unit Offline
Redundancy Mode
9.3.10

Operations and Maintenance

Open the Operations and Maintenance page from the Main Menu.
Optional Packet Processor - Serial/Telnet CLI Operation
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Hot Key
[RO]
• If standalone CDM-570A/570AL – not used.
• If Online Redundant CDM-570A/570AL – displays Redundant
Management IP Address
• If Offline Redundant CDM-570A/570AL – displays Redundant
Management IP Address
[RO]
• If standalone CDM-570A/570AL – not used.
• If Online Redundant CDM-570A/570AL – displays Redundant
Management Subnet
• If Offline Redundant CDM-570A/570AL – displays Redundant
Management Subnet
F When this is active, unit is currently the Online unit, select to force a
switchover – i.e., place this unit into Offline (standby) mode.
A Toggle mode as [Auto] or [Manual].
Figure 9-50. Operations and Maintenance
9–64
Description
MN-CDM570A
Revision 5