Vipersat Configuration - Comtech EF Data CDM-570A Installation And Operation Manual

9.3.7

Vipersat Configuration

VMS v3.x.x VIPERSAT Management System User Guide (CEFD P/N MN/22156)
This page displays only if the optional Vipersat feature is enabled.
Open the Vipersat Configuration page from the Main Menu.
Selection
STDMA Mode
Automatic Switching
Unit Role
Expansion Unit
Bandwidth Group ID
Unit Name
Multicast Management IP
Address
Multicast VMS Management IP
Address
Managing IP Address
Path Loss Data Multicast
(PLDM)
Dynamic Power Control Config
Set Home State Parameters
Optional Packet Processor - Serial/Telnet CLI Operation
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Figure 9-27. Vipersat Configuration
Hot Key
T
Used only when CDM-570A/570AL is used in a Vipersat
Management System (VMS).
A
R
See the VMS v3.x.x VIPERSAT Management System User Guide
E
(CEFD P/N MN/22156)for complete information.
B
N
M
V
I
P
C
H
9–40
Description
MN-CDM570A
Revision 5