Comtech EF Data CDM-570A Installation And Operation Manual page 318

Command
Parameter (Instruction
Type Code and
Qualifier)
Faults and
Status (continued)
Serial-based Remote Product Management
Arguments for
Command or
Response to
Query
c = Rx Traffic status:
0 = Rx Traffic OK
1 = Demodulator unlocked
2 = Reserved
3 = AGC Alarm - signal out of range
4 = Reserved
5 = RS Frame sync alarm
6 = Reserved
7 = EDMAC Frame sync alarm
8 = APC Band mismatch alarm
A = Buffer Underflow
B = Buffer Overflow
D = Eb/No alarm
E = LNB Alarm (if attached)
F = AIS detected on incoming data
9 = Reserved
A = Buffer Underflow
B = Buffer Overflow
C = Reserved
D = Eb/No alarm
E = LNB Alarm (if attached)
F = AIS detected on incoming data
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Description of Arguments
8–52
Revision 5
Query
Response to Response to
(Instruction Code
Command
and Qualifier)
MN-CDM570A
Query