High-Performance Packet Processor Features; 10/100 Baset Ethernet Interface - Comtech EF Data CDM-570A Installation And Operation Manual

D.1.2

High-Performance Packet Processor Features

•
10/100BaseT Ethernet Interface
•
Network-Based Management:
HTTP Interface for complete product management
o
SNMP with public and private MIB
o
Console Port interface for local network management
o
Telnet interface for remote product M&C
o
Remote software/firmware upgrade via FTP
o
Configuration Backup and Restore via FTP
o
Event Logging to Capture all Packet Processor Activity
o
Detailed Statistics of IP traffic
o
•
Header Compression (Layer 2 only)
•
IGMP Support for Multicast
•
Static IP Routing for Unicast and Multicast
•
Managed Switch Mode with VLAN
•
Adaptive Coding and Modulation (ACM)
D.1.2.1 10/100 BaseT Ethernet Interface
In Router Mode operation, the 10/100BaseT Ethernet Interface is used for routing IP traffic to be
transmitted over the satellite or routed to another device on the local LAN. In Managed Switch
Mode, the Ethernet Interface is used to forward IP and non-IP traffic over the satellite. Local or
remote management of all CDM-570A/570AL-IP (w/Packet Processor-related functions) is also
available via Telnet, HTTP, or SNMP.
Optional High Performance Packet Processor
CDM-570L/570AL Satellite Modem with Optional Packet Processor
D–9
Revision 5
MN-CDM570A