Table of Contents
Advertisement
CHAPTER 18 OSDC
18.5.8
Transparent Color Control (Command 6-2)
Command 6-2 is a command that controls the transparent color.
■ Command 6-2 (Transparent Color Control)
❍ Address: 116
❍ Format
15
14
13
0
0
TCC:
Transparent color control
(0: OFF, 1: ON)
HCC:
Translucent color control
(0: OFF, 1: ON)
❍ [Function]
This command controls a transparent color and a translucent color.
❍ [Supplement]
•
An arbitrary color display part can be assumed to be non-display by setting the arbitrary color
code to transparent color code (TC3-TC0) and doing transparent color control ON(TCC=1)
setting. The arbitrary color part outputs the display of the subordinate position layer.
•
An arbitrary color display part is made non-display by setting the arbitrary color code to
translucent color code (HC3-HC0) and doing translucent color control ON(HCC=1) setting.
Moreover, non-display period can be output from the terminal VOB2 at the same time. The
arbitrary color part outputs the display of the subordinate position layer.
Note:
The signal of a translucent period from the terminal VOB2 is for the areas other than the character,
the framing, and graphic of the main screen.
620
H
12
11
10
0
0
0
0
TCC HCC TC3
9
8
7
6
TC2
TC1
TC3 - TC0:
HC3 - HC0:
5
4
3
2
TC0
HC3
HC2 HC1 HC0
Transparent color code
(16 colors)
Translucent color code
(16 colors)
1
0
Advertisement
Table of Contents
